ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
148 2CDC508198D0211 Rev. A | AC/S 1.x.1
KNX to ASM output socket
Using this template, the value received in the group object is output on the ASM output socket for linking to
other modules. This value is also output on the web user interface.
The settings for the ASM socket, web user interface, KNX and BACnet are set automatically as follows:
ASM socket:
Output
WebUI:
Display
KNX:
Input from KNX
BACnet:
None
Main data point type
Data point type
Definition of the data point type that is transferred between the interfaces.
You will find further information on the data point types in chapter 4.7 Data point types
.
Use value after restart
Options:
Last value
Initial value
This parameter defines which value is output on the web user interface and the ASM socket after starting
the application controller until a new value is received in the group object.
• Last value: The last value before device start is saved and reused. The value parameterized further
down in Initial value is used after the first download of the module to the application controller.
• Initial value: The value described further down in Initial value is used.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English