ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
160 2CDC508198D0211 Rev. A | AC/S 1.x.1
ASM input socket to KNX
The value received on the ASM input socket
is sent by the group object using this template. A value from
the KNX bus does not update this value. The value is also output on the web user interface.
The settings for the ASM socket, web user interface, KNX and BACnet are set automatically as follows:
ASM socket:
Input
WebUI:
Display
KNX:
Output to KNX
BACnet:
None
Aggregate function
Options:
None
Max
Min
Avg
Or
And
Using the Aggregate function it is possible to connect several output sockets to one input socket at the
same time. As a result there are several different signals on the input socket. This setting specifies the
related calculation function necessary
This function is shown graphically as appropriate on the input socket in the Linking view.
Depending on the selection, the data point types (DPT) available may be restricted. See following
parameters.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English