ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 175
Use value after restart
Options:
Last value
Initial value
This parameter specifies which value is output in the group object and on the web user interface after
starting the application controller until a new value is received on the ASM input socket.
• Last value: The last value before device start is saved and reused. The value parameterized further
down in Initial value is used after the first download of the module to the application controller.
• Initial value: The value described further down in Initial value is used.
Initial values
Initial value
This parameter defines the value that is output after downloading the module. This value is output on the
web user interface and the ASM socket until a new value in the group object overwrites it.
The value range is dependent on the data point type set.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English