ABB i-bus KNX AC/S 1.x.1 Series

ABB i-bus
®
KNX
Parameters
228 2CDC508198D0211 Rev. A | AC/S 1.x.1
The web user interface for the module displays the HVAC systems in the room and their status based on
the settings in the module. Systems and functions not activated are hidden. If activated in the settings for
the module, all users except the "Viewer" can operate the systems via the web user interface and, e.g.,
change the room setpoint temperature or override a valve.
If values are changed, the new value is only displayed once the KNX room thermostat linked has updated
this value. Depending on the layout and load on the KNX system, there may be a short delay.