ABB i-bus KNX AC/S 1.x.1 Series - Page 250

ABB i-bus
®
KNX
Parameters
250 2CDC508198D0211 Rev. A | AC/S 1.x.1
Selection of Based on Scheduler option:
Dependent parameter(s):
Scheduler operating mode Standby
Options:
No (checkbox cleared)
Yes (checkbox selected)
The "Standby" operating mode is activated using this parameter and a
corresponding ASM input socket displayed.
Scheduler operating mode Economy
Options:
No (checkbox cleared)
Yes (checkbox selected)
The "Economy" operating mode is activated using this parameter and a
corresponding ASM input socket displayed.
Scheduler operating mode Building Protection
Options:
No (checkbox cleared)
Yes (checkbox selected)
The "Building Protection" operating mode is activated using this parameter
and a corresponding ASM input socket displayed.