ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
290 2CDC508198D0211 Rev. A | AC/S 1.x.1
Supply temperature page
On this page it is shown how the supply setpoint temperature is calculated. The settings on which the
calculation is based can be changed.
The information displayed on this page may vary depending on which settings have been selected for the
supply setpoint temperature calculation in the ASM settings.
This section shows the current status of the calculation. These values cannot be changed by the user.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English