ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
304 2CDC508198D0211 Rev. A | AC/S 1.x.1
Selection of Custom option:
Dependent parameter(s):
Custom supply temperature curve
After you click the "Edit" button, a window opens where you can add a custom supply
temperature curve by changing the supply setpoint temperature. The shape of the
curve can be set as required by entering the points. The limit specified via the Max.
supply temperature parameter is displayed on the chart as a red line.
This curve is used after downloading the module and can be modified via the web
user interface for the module.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English