ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 347
Valve
Settings for the cooling distribution circuit valve.
Valve type
Options:
3-way valve (mixing valve)
2-way valve
None
Setting for the valve type used in the cooling distribution circuit. This parameter affects the depiction on the
web user interface.
Selection of 3-way valve (mixing valve) or 2-way valve option:
Dependent parameter(s)
Status Valve purge
Options:
No (checkbox cleared)
Yes (checkbox selected)
If this function is activated, the status of the valve purge can be received by a group object and
output on the web user interface, in a BACnet object and on the ASM socket.
Valve override disable/enable
Options:
No (checkbox cleared)
Yes (checkbox selected)
If this function is activated, the valve can be overridden via the web user interface. For this purpose
additional group objects are displayed that must be connected to the cooling distribution circuit
controller.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English