ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 369
This section displays the current supply and return temperatures from the cooling distribution circuit
controller linked via KNX.
This section displays the current supply setpoint temperature calculated by this module. This temperature
is sent via KNX to the cooling distribution circuit controller linked.
If activated in the settings, the supply setpoint temperature can be overridden by the "admin" and "expert"
users via the web user interface. For this purpose the slider must be dragged to the "Override" position. A
supply setpoint temperature continues to be calculated and displayed in "Auto" during the override. In this
way you can see the value that will be used after changing the slider.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English