ABB i-bus KNX AC/S 1.x.1 Series - Page 412

ABB i-bus
®
KNX
Parameters
412 2CDC508198D0211 Rev. A | AC/S 1.x.1
7.14.5 BACnet objects
BACnet input objects
None
BACnet output objects
Object name Object type Unit COV send
condition
Operating mode Scheduler WebUI: State Positive integer
value
95 (No Units) 1.0
The current operating mode, based on the scheduler, is output.
Signal value:
0 = Off
1 = On