ABB i-bus KNX AC/S 1.x.1 Series

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 421
7.15 ON/OFF Scheduler WebUI ASM
7.15.1 General
This application-specific automation module (ASM) is an on/off timer. The switching times are
parametrized via the web user interface. Switching commands can be set to the minute for each weekday,
and exceptions (e.g. for holidays) can be defined on a weekly, monthly and yearly basis.
The application controller outputs the switching command on the KNX bus, on the ASM output socket and
on BACnet.
Note
It is essential the clock in the application controller is set to operate this module.
7.15.2 Settings
General
You will find descriptions of the global settings (Name, Description, Reinstall, BACnet, WebUI) in chapter
7.3, Global ASM settings.