ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
448 2CDC508198D0211 Rev. A | AC/S 1.x.1
7.18 ON/OFF Scheduler BACnet ASM
7.18.1 General
This application-specific automation module (ASM) is an on/off timer. The switching times are
parametrized by other BACnet devices via the BACnet interface of the application controller. The switching
times can be viewed via the web user interface.
The application controller outputs the switching command on the KNX bus and on the ASM output socket.
The application controller ensures that the switching commands are executed, even if there is a
malfunction in the BACnet system.
Note
It is essential the clock in the application controller is set to operate this module.
7.18.2 Settings
General
You will find descriptions of the global settings (Name, Description, Reinstall, BACnet, WebUI) in chapter
7.3, Global ASM settings.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English