ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 451
7.18.5 BACnet objects
Type
BACnet name
Object type
Unit
COV send
condition
Input ON/OFF Scheduler BACnet: State Schedule - -
Input ON/OFF Scheduler BACnet: Calendar Calendar - -
BACnet input objects
Object name
Object type
Unit
COV send
condition
ON/OFF Scheduler BACnet: State
Schedule
-
-
Use this BACnet object of type Schedule to parameterize the switching times via BACnet.
Signal value:
0 = Off
1 = On
ON/OFF Scheduler BACnet: Calendar
Calendar
-
-
The module has this BACnet input object if the
Yes
option is selected for the
Activated
parameter in
Calendar
section of the
BACnet parameter window.
This BACnet calendar object can be used to define an additional exception calendar and to link this to any BACnet scheduler
in the BACnet system.
BACnet output objects
None

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English