ABB i-bus KNX AC/S 1.x.1 Series

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 453
7.19 Temperature Scheduler BACnet ASM
7.19.1 General
This application-specific automation module (ASM) is a timer for temperatures. The switching times are
parametrized by other BACnet devices via the BACnet interface of the application controller. The switching
times can be viewed via the web user interface.
The application controller outputs the switching command on the KNX bus and on the ASM output socket.
The application controller ensures that the switching commands are executed, even if there is a
malfunction in the BACnet system.
Note
It is essential the clock in the application controller is set to operate this module.
7.19.2 Settings
General
You will find descriptions of the global settings (Name, Description, Reinstall, BACnet, WebUI) in chapter
7.3, Global ASM settings.