ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 463
• 12.xxx [4-byte unsigned]
o 12.*
o 12.001 [counter pulses (unsigned)
• 13.xxx [4-byte signed]
o 13.*
o 13.001 [counter pulses (signed)]
o 13.002 [flow rate (m3/h)]
o 13.010 [active energy (Wh)]
o 13.011 [apparent energy (VAh)]
o 13.012 [reactive energy (VARh)]
o 13.013 [active energy (kWh)]
o 13.014 [apparent energy (kVAh)]
o 13.015 [reactive energy (kVARh)]
• 14.xxx [4-byte floating point value]
o 14.*
o 14.000 [acceleration (m/s2)]
o 14.001 [angular acceleration (rad/s2)]
o 14.002 [molar energy (J/mol)]
o 14.003 [radioactivity (1/s)]
o 14.004 [amount of substance (mol)]
o 14.005 [amplitude]
o 14.006 [angle (radian)]
o 14.007 [angle (degree)]
o 14.008 [angular momentum (Js)]
o 14.009 [angular frequency (rad/s)]
o 14.010 [area (m2)]
o 14.011 [capacitance (F)]
o 14.012 [flux density (C/m2)]
o 14.013 [charge density (C/m3)]
o 14.014 [compressibility m2/N)]
o 14.015 [conductance (S)]
o 14.016 [conductivity (S/m)]
o 14.017 [density (kg/m3)]
o 14.018 [elec. charge (C)]
o 14.019 [elec. current (A)]
o 14.020 [current density (A/m2)]

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English