ABB i-bus
®
KNX
Parameters
70 2CDC508198D0211 Rev. A | AC/S 1.x.1
Alternatively, you can also create a certificate externally or buy a certificate and install it in the device in
the .pem file format.
As soon as you have activated the secure data connection, the web user interface is refreshed with the
secure connection. Unencrypted access to the device is then no longer possible. The user "admin" can
delete the SSL certificate again at any time. The button is shown as soon as an SSL certificate has been
installed on the device.
To Next Page
Loading...
