NoteAction
xx2000001695
Pull out the gearbox.5
Refitting the base
Use these procedures to refit the base.
Checking the radial sealings on the base
NoteAction
For robots with protection type Clean Room:1
Clean the joints that have been opened and wipe
the parts free from particles with spirit on a lint
free.
xx2000001713
Check the radial sealings on the base.
Replace if damaged, as described below.
2
Radial sealing: 3HAC066433-001
xx2000001714
Place the new motor-side radial sealing in its
groove in the base.
The sealing lip is towards the swing side.
3
Continues on next page
Product manual - IRB 1300 223
3HAC070390-001 Revision: G
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the base
Continued
To Next Page
Loading...
