EasyManua.ls Logo

ABB IRB 1300 - Page 240

ABB IRB 1300
770 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NoteArticle numberSpare part
Not used with protection class
IP40.
Replace if damaged.
3HAC067834-001Gasket for tubular cover
Not used with protection class
IP40.
Replace if damaged.
3HAC067833-001Gasket for housing cover
Not used with protection class
IP40.
Replace if damaged.
3HAC067832-001Gasket for lower arm cover
Used for IRB 1300-11/0.9.
Not used with protection class
IP40.
Replace if damaged.
3HAC067822-001Gasket for swing support, short
Used for IRB 1300-10/1.15, IRB
1300-7/1.4 and IRB 1300-12/1.4.
Not used with protection class
IP40.
Replace if damaged.
3HAC067823-001Gasket for swing support, long
Used for IRB 1300-11/0.9.
Not used with protection class
IP40.
Replace if damaged.
3HAC067824-001Gasket for swing cover, short
Used for IRB 1300-10/1.15, IRB
1300-7/1.4 and IRB 1300-12/1.4.
Not used with protection class
IP40.
Replace if damaged.
3HAC067825-001Gasket for swing cover, long
Not used with protection class
IP40.
Replace if damaged.
3HAC067821-001Gasket for swing top cover
Not used with protection class
IP40.
Replace if damaged.
3HAC032050-001Seal bolt
Used with protection types Clean
Room and Foundry Plus.
Replace if damaged.
3HAC070148-003Radial sealing on swing (to base)
Not used with protection class
IP40.
Replace if damaged.
3HAC070148-004Radial sealing on swing (to lower
arm)
Used with protection class IP67
and protection type Foundry Plus.
3HAC065675-001Sealing ring, swing side
Not used with protection class
IP40.
Replace if damaged.
3HAC061327-015O-ring on lower arm
Continues on next page
240 Product manual - IRB 1300
3HAC070390-001 Revision: G
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.4.2 Replacing the swing
Continued

Table of Contents

Related product manuals