NoteAction
CAUTION
Removing motors will release axes. This means
the axes can fall down.
Make sure axes are well supported before remov-
ing motors.
3
xx2000001604
Loosen the screws and move the motor slightly
to slacken the timing belt.
4
Remove the timing belt from its groove on the
motor.
5
xx2000001605
Remove the screws and washers.6
xx2000001669
Carefully lift out the motor.7
xx2000001670
Remove the timing belt.8
Continues on next page
Product manual - IRB 1300 375
3HAC070390-001 Revision: G
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.5.2 Replacing the housing and extender unit
Continued
To Next Page
Loading...
