ABB IRB 1300 - Page 96

Protection covers
Protection covers for water and dust proofing
Protection covers are delivered together with the robot and must be well fitted to
the connectors in any application requiring water and dust proofing.
Always remember to refit the protection covers after removing them.
(A)
(A)
(B)
(C)
(C)
xx2000001008
CP/CS or Ethernet connector protection coversA
SMB connector protection coverB
Air hose connector protection coversC
96 Product manual - IRB 1300
3HAC070390-001 Revision: G
© Copyright 2020-2022 ABB. All rights reserved.
3 Installation and commissioning
3.6.2 Customer connections
Continued