9 Spare part / part list
9.2.2. Spare part list
4473HAC023082-001 Revision: E
© Copyright 2004-2008 ABB. All rights reserved.
Optional equipment
All components required for installation of optional equipment, such as cabling, extra
attachment plates etc., are listed in the installation procedure for the equipment. The table
below points out the installation procedures for the equipment (in part 1: Procedures, of the
Product manual).
Option no. Equipment Installation is detailed in:
25-3 Position switch, axis 1 Installation of position switches (option) on page
111
30-1 Position switch, axis 2 -
33-1 Position switch, axis 3 -
37-1 Base plate Securing the base plate on page 74
87-1 Cooling fan, axis 1 Installation of cooling fan for motors, axes 1-3
(option) on page 97
88-1 Cooling fan, axis 2 -
89-1 Cooling fan, axis 3 -
159-1 Fork lift device Lifting robot with fork lift on page 61
184-1 Insulated tool flange -
213-1 Safety lamp -
536-1 Chip protection Installation of chip and dust protection (option)
on page 87
571-1 Base spacers Installation of base spacers (option) on page 95
430-1 Upper arm covers -
Continued
To Next Page
Loading...
