ABB IRC5 Compact

Action
Connect emergency stop harness (E) connector S21.3 to Emergency Stop on the
control panel.
11
Connect the control harness (F) connector A21.X6 to the panel board.12
Connect the control harness (F) connector S21.2 to Motors On on the control panel.13
Connect the control harness (F) connector S21.1 to Key Switch on the control panel.14
Route cables properly in existing cable holders.15
Continues on next page
108 Product manual - IRC5 Compact
3HAC047138-001 Revision: G
© Copyright 2009-2017 ABB. All rights reserved.
2 Installation and commissioning
2.11.3 Installing the Safety module DSQC1015 for SafeMove
Continued