ABB IRC5 Compact

2.9 Memory functions
2.9.1 Memory functions
General
The controller is fitted with an SD-card memory containing ABB Boot Application
software. The SD-card memory is located inside the computer unit.
For more information on how to replace the SD-card memory, see Replacement
of SD-card memory in computer unit on page 163.
Note
Only use SD-card memory supplied by ABB.
CAUTION
Reformatting the SD-card or modifying the disk partition can cause irreparable
boot-up problems.
Product manual - IRC5 Compact 91
3HAC047138-001 Revision: G
© Copyright 2009-2017 ABB. All rights reserved.
2 Installation and commissioning
2.9.1 Memory functions