1 Safety
1.1 Introduction to safety information
Overview
The safety information in this manual is divided into the following categories:
• General safety aspects, important to attend to before performing any service
or installation work on the controller. These are applicable for all service
work and are found in section General safety information on page 16.
• Safety signals and symbols shown in the manual and on the controller,
warning for different types of dangers, are found in Safety signals and
symbols on page 27.
• Specific safety information, pointed out in the procedure at the moment of
the danger. How to avoid and eliminate the danger is either detailed directly
in the procedure, or further detailed in separate instructions, found in section
Safety related instructions on page 33.
Product manual - IRC5 Compact 15
3HAC047138-001 Revision: G
© Copyright 2009-2017 ABB. All rights reserved.
1 Safety
1.1 Introduction to safety information