ABB IRC5 Compact User Manual

Mounting the FlexPendant holder
Use this procedure to mount the FlexPendant holder.
Note/illustrationAction
xx0500002546
Remove the protective liner from the tape.1
Press the mounting plate with FlexPendant
holder against the surface where it should be
mounted.
Note
The surface must be clean and dry.
2
Note
For rack mounted IRC5 Compact, do not place the FlexPendant holder on top
of the rack. Find a solution where the FlexPendant is placed so that it cannot fall
to the floor from a high position.
50 Product manual - IRC5 Compact
3HAC047138-001 Revision: G
© Copyright 2009-2017 ABB. All rights reserved.
2 Installation and commissioning
2.4.2 Mounting the FlexPendant holder
Continued

ABB IRC5 Compact Specifications

General

Brand	ABB
Model	IRC5 Compact
Category	Controller
Language	English