Operation Manual / Power2 850-M / 4.2 High-pressure stage
4 Disassembly and assembly / 4.10 Installing the cartridge group
© Copyright 2017 ABB. All rights reserved. HZTL4063_EN Revision A August 2017
Fig.17: Installing the cartridge group 2
Part number Thread and tightening torque
42099 M12x80
80 Nm
Table8: Tightening torque (42099)
5. Fit a screw(42099) as a safeguard.
6. Remove screw(90656), nut(90415) and plates(90031).
7. Remove screws (90900) and bracket (90030).
8. Fit screws (42099). Observe the tightening torque.
9. Fit a new O-ring(42010).
Page 21 / 35
To Next Page
Loading...
