91
FEM630 | ELECTROMAGNETIC FLOWMETER | OI/FEM630-EN REV. A
General Alarm
Only if the parameter ‘Logic Output Action’ is set to Alarm Signal.
Qv Volumeflow Max
Qv Volumeflow Min
EPD
TFE
Gas Bubble
Conductivity
Sensor Temperature
In house Temp
Menu / parameter Description
Logic Output Action
Selection of binary output function.
Active Mode
Select switching properties for the binary output.
• Active High: Normally open
• Active Low: Normally closed
Default setting: Active High.
Mode
• Off: Digital output deactivated.
• Logic: Digital output functions as binary output (for function see parameter ‘...Setup Logic Output’).
...Setup Logic Output
Selection of submenu ‘...Setup Logic Output’ using .
Only available if ‘Mode / Logic’ has been selected.
...Alarm Config
Selection of submenu ‘...Alarm Config’ using .
Only available if ‘Mode / Logic’ has been selected.
8 ...Operation
...Parameter descriptions
To Next Page
Loading...
