ABB PVS-100 User Manual

- 100 -
000031BG
General conditions
Before checking the operation of the equipment, it is necessary to have a
thorough knowledge of the Instruments chapter 6 and the functions that
have been enabled in the installation process.
The equipment operates automatically without the aid of an operator;
the operating state should be controlled through the equipment’s
instrumentation.
The interpretation or variation of some data is reserved exclusively for specialized and
qualied staff.
The incoming voltage must not exceed the maximum values shown in the technical data,
section 2 in order to avoid damaging the equipment.
Consult the technical data for further details.
During operation, check that the environmental and logistical conditions
are correct (see installation chapter 5).
Make sure that environmental and logistical conditions have not changed
over time and that the equipment is not exposed to adverse weather
conditions.
7
Operation

ABB PVS-100 Specifications

General

Rated AC power output	100 kW
AC Voltage	400 V
Topology	Transformerless
Cooling Method	Forced Air
Operating temperature range	-25°C to +60°C (derating above 45°C)
Cooling	Forced air
Frequency	50/60 Hz