- 114 -
000842AG
7 - Operation
COMM. (WI-FI/ETHERNET) LED behaviour
The following table shows all the possible status of “COMM. (WI-FI/ETH-
ERNET)” LED on the LED panel
08
according to the operating status of
the wireless or ethernet communication lines.
LED Description
COMM. (WI-FI/ETHERNET)
(BLUE)
Communication status of the wireless or ethernet communication lines:
OFF: Wireless not congured or/and ethernet cable not connected.
Blinking slow (0.5 Hz): Scanning for available wireless networks.
Blinking fast (2 Hz): Trying to connect to a wireless network.
Steady ON: Wireless or ethernet network is connected to the inverter and
IP address is obtained.
To Next Page
Loading...
Need help?
General