ABB PVS-100 User Manual

- 108 -
000841BG
7 - Operation
Once the inverter is connected to the customer wireless
network, a new message will conrm that the connection
is acquired.
The message provides the IP Address assigned by the
home wireless network router to the inverter that can be
used each time you want to access the Web User Interfa-
ce, with the inverter connected to the home wireless net-
work. Take note of it.
Click on “Next” button to proceed to the next stage of the
conguration wizard.
The IP address assigned may vary for reasons connected to the wireless home router setup
(for example, a very brief DHCP lease time). If verication of the address is required, it is
usually possible to obtain the client list (and the corresponding IP addresses) from the wireless
router administration panel.
If the inverter loses the connection with the home wireless
network (and therefore, loses the internet connection), it
will once again enable its own access point.
The most common causes of losing connectivity might be: different wireless network pas-
sword, faulty or unreachable router, replacement of router (different SSID) without the neces-
sary setting updates.

ABB PVS-100 Specifications

General

Rated AC power output	100 kW
AC Voltage	400 V
Topology	Transformerless
Cooling Method	Forced Air
Operating temperature range	-25°C to +60°C (derating above 45°C)
Cooling	Forced air
Frequency	50/60 Hz