ABB PVS980-MWS - 9 Maintenance; Contents of this Chapter; Tool List

Maintenance 51
9
Maintenance
Contents of this chapter
This chapter contains the preventive maintenance instructions for the megawatt station.
The instructions given here are intended for personnel who are trained and certified by
ABB to perform these tasks.
WARNING! Only an authorized electrician is permitted to do maintenance work
on the MWS. Obey the Safety instructions on page 9, and the local safety
regulations. If ignored, physical injury or death, or damage to the equipment may
occur.
WARNING! Do not do electrical work during a thunderstorm.
Tool list
• Torx drivers
• Philips screwdrivers (PoziDriv)
• Torque wrench
• Set of wrenches and sockets
• Cable and wire strippers
• Crimping tool and cable lugs
• Multimeter
• Personal protective equipment