A070930-ANSI V2 EN
Figure 38: Editing a value
• If the entered value is within the accepted value range, the selection is
highlighted in green. If the value is out of range, the row is highlighted in red
and a warning dialog box is displayed. Write to IED is unavailable.
A070934-ANSI V1 EN
Figure 39: Warning indicating that the entered value is incorrect
• If writing values fails, a warning dialog box is displayed.
Section 4 1MAC054853-MB B
Using the HMI
64 615 series ANSI
Operation Manual
To Next Page
Loading...
