abi 7500 - Page 72

Chapter 2 Design the Relative Standard Curve Experiment
Finish the Design Wizard
Applied Biosystems 7500/7500 Fast Real-Time PCR System Getting Started Guide for Relative Standard Curve
and Comparative C
T
Experiments
48
Notes
Design
Guidelines
When you design your own relative standard curve experiment:
• In the Review Plate Layout for Experiment window, select the appropriate exit option:
• By default, experiments are saved to:
<drive>:\Applied Biosystems\<software name>\experiments
To change the:
– Save location for a specific experiment – Navigate to the desired location using
the Save Experiment dialog box.
– Default save location – Select ToolsPreferences, then select the Defaults tab.
In the Data Folder field, browse to then select the desired location.
For More
Information
For more information on using Advanced Setup, see “Advanced Setup Workflow” on
page 204.
Click To...
Save Experiment Save and close the experiment without making any
further changes or starting the run.
Start Run for This Experiment Save the experiment and start the run. Make sure the
reaction plate is loaded in the instrument.
Edit Plate Layout Use advanced setup to edit the plate layout.
Create Another Experiment
Using the Design Wizard
Save and close the current experiment, then create
another experiment using the Design Wizard.
Return to the Wizard Return to the experiment to make changes using the
Design Wizard.