ABL Wallbox eM4 Single - Page 20

20 Introduction to the Wallbox eM4Single
x LAKK2K1
Type 2 to Type 1 adapter cable according to IEC 62196-2, up to 32A 230VAC, single
phase, length approx. 4m
x 100000361
POLEM4 Single mounting pole made of galvanised sheet metal for outdoor installation of a
Wallbox eM4Single, the WPR12 weather protection roof and a CABHOLD cable holder
h = 1,647mm, w = 285mm, d = 180mm
x EMH9999
Concrete foundation for mounting the POLEM4Single mounting pole and other ABL mount-
ing poles
h = 650mm, w = 430mm, d = 190mm
x 100000245/ 100000246
POLE SlimSingle compact galvanised sheet metal mounting pole for the outdoor installa-
tion of one (100000245) or two Wallboxes eM4Single (100000246) via the adapter plate(s)
(100000248) supplied as well as up to two CABHOLD cable holders
h = 1,469mm, w = 290mm, d = 210mm
x 100000238
POLE Slim concrete foundation for installing a POLE Slim mounting pole
h = 600mm, w = 260mm, d = 260mm
x WPR12
Weather protection roof for installation on an exterior wall or the mounting poles
POLEMH1, POLEMH2 and POLEM4Single
h = 142mm, w = 395mm, d = 225mm
x CABHOLD
Cable holder with charging plug receptacle for installation on an exterior wall or the
mounting poles POLEMH1/2/3, POLEM4Single and POLESlim
h = 187mm, w = 76mm, d = 105mm
x 100000253
RFID key fobs for all ABL charging stations: Set of ID tag keys (5pcs.) to extend user pool
x 100000193
ABL Energy Meter external meter for integrating the Wallbox eM4Single Controller(+) into
a dynamic load management, top-hat rail module
h = 88mm, w = 70mm, d = 65mm