3Contents
Contents
Contact 2
Additional technical information 5
Intended use 5
Information in this document 5
Safety and user information 6
General 6
Safety instructions 6
Operating instructions 8
Introduction to the Wallbox eM4Single 9
Identifying your wallbox 9
The Wallbox eM4Single at a glance 10
How the HMI works 12
Information displayed in the energy meter 14
Forming charging groups and network topologies 15
External load shedding in accordance with VDEAR-N4100 18
Components included with the wallbox 18
Accessories 19
Installation of the Wallbox eM4Single 22
Installation site requirements 22
Tools and accessories required 23
Inserting the power and data cables 24
Preparing the installation site 25
Preparing and fixing the wallbox in place 27
Electrical connection of the wallbox 28
Phase rotation within a charging group 30
Data cable connections 30
Connecting a control cable in accordance with VDE AR-N 4100 31
Preparing and installing the LTE USB stick 32
Setup of the Wallbox eM4Single 33
Configuring the Wallbox eM4Single 35
Availability of the ABL Configuration App 35
Setting up communication via the ABL Configuration App 35
Onboarding – Configuration of an Extender wallbox for stand-alone operation 39
Onboarding – Configuring the Controller/ Extender operating mode 39
Control Board settings and reboarding 40
Description of the charging process 42
Error resolution and maintenance 45
Support via the ABL Support page 45
Quick solution for general problems 46