Accu-Chek ACTIVE User Manual

102
Symbols, problems and error messages
3
You are in the settings for time and date.
4
When an average is displayed (test-result
memory): the symbol is preceded by the number
of days taken into account.
5
(ashing)
The meter is exposed to too much light.
6
(ashing)
A test is in progress or an average is being
calculated.
7
General ag
8
or
The unit your meter uses to display the blood
glucose result, either mg/dL or mmol/L.
9
+
10
The test strips are past their expiry date. Change
the test strips and code chip. Check the time and
date settings, as the meter compares these
against the expiry date encoded in the code
chip.

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH