Accu-Chek ACTIVE User Manual

103
Symbols, problems and error messages
10
+
11
(ashing)
The test strip was removed from the meter
before blood or control solution was applied, for
example to apply blood outside the meter.
11
(ashing)
Now you can apply blood or control solution to
the test strip.
12
The number being displayed is the code number.
(ashing) together with
The code chip has not been correctly inserted

into the meter. Remove the code chip and
re-insert it.
There is no code chip in the meter. Insert the

code chip belonging to the Accu-Chek Active
test strips you are currently using.
13
After Meals ag
14
Before Meals ag
15
While the test is performed the temperature is or
was outside the permitted range of +10 to
+40 °C.

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH