104
Symbols, problems and error messages
Do not use the result as a basis for therapeutic
decisions.
Ensure that the ambient temperature is between
+10 and +40 °C and wait for the meter to adapt
to that temperature. Repeat the test with a new
test strip.
Flag for performance check
Additional time information if 12-hour time
format is set.
Symbolsappearinginthenumericeld
In the numeric eld
(mg/dL meter) or
(mmol/L meter) the following symbols can appear:
together with a ashing
:
The code chip has not been correctly inserted into
the meter. Remove the code chip and re-insert it.
There is no code chip in the meter. Insert the code
chip belonging to the Accu-Chek Active test strips
you are currently using.
To Next Page
Loading...
