Accu-Chek ACTIVE User Manual

113
Symbols, problems and error messages
You removed the code chip while testing was in progress.

Re-insert the code chip into the meter and repeat the test with a new test strip.
The test strip was bent or moved while testing was in progress.

Repeat the test with a new test strip.
You did not insert the test strip correctly or completely.

Hold the test strip so that the arrows printed on it and the orange square face up-
wards. Without bending it, gently push the test strip into the test strip guide in the
direction of the arrows until you feel it lock into place.

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH