65
Using the meter as a diary
Depending on which type of analysis you opt for, you
will require either a special software programme and/
or special hardware products. For more information
please contact your customer support and service
centre.
If you already have a hardware or software product
from Roche Diagnostics for transfering and evaluat-
ing test results, it may not recognise more recent
meters and the results will therefore not be down-
loaded. You may need a more recent software version
for your hardware or software product. In this case
please contact your customer support and service
centre.
Your test results can only be fully analysed if all of the
results have been saved with the date and time, i.e. if
you have set the date and time.
The results remain in the meter’s memory after
downloading.
You cannot perform a test while results are being
downloaded.
To Next Page
Loading...
Need help?
General
