Accu-Chek ACTIVE User Manual

74
Checking your meter
6 Check that this code number is the same as the
code number on the label of the test strip con-
tainer.
If the numbers do not match, even though the code
chip in the meter belongs to the test strip container,
please contact your customer support and service
centre.
Following the code number, the test strip symbol and
the ashing blood drop symbol appear in the display.
Now you have approx. 90 seconds to apply control
solution to the test strip. After this time, the meter
turns itself off.

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH