Accu-Chek ACTIVE User Manual

76
Checking your meter
No ag
Press 4 times
briey
Control (bottle)
The ashing hourglass symbol indicates that the
test is in progress. The test is complete after approx.
5 seconds and the result appears on the display. The
meter automatically saves the result.
To distinguish this performance check from blood
glucose test results at a later date, you need to ag it
as a performance check.
While the test result is displayed:
11 Press the S button briey 4 times.
The
symbol for control is displayed (see also
Chapter 5, “Flagging test results” section).

Accu-Chek ACTIVE Specifications

General

Measurement Range	10-600 mg/dL
Sample Size	1 - 2 μL
Test Time	5 seconds
Memory Capacity	500 results
Display Type	LCD
Automatic Coding	Yes
Blood Sample	Capillary whole blood
Dimensions	97.8 x 46.8 x 19.1 mm
Battery Type	1 x 3V lithium battery (type CR2032)
Battery Life	Approximately 1000 tests
Data Transfer	Via infrared (IR) to computer
Operating Conditions	8-42°C, 10-85% RH