www.accuenergy.com
V: 1.00 Revised: Jan 2021
53
• Post Channel 1/2/3 Enable: Enable the Post Channel 1 in order to congure the settings
needed to post data via the HTTP(S)/FTP post functions
• Post Method: Select the method for posting the les, the user can choose HTTP/HTTPS
or FTP
• Post Name Fixed: This conguration needs to be enabled in order for the user to control
the name of the le that will be posted. Otherwise, the le name will be based on the Log
File Name Format conguration from the Data Log settings
• Post File Name: Users can enter a name for the le that will be posted as if 'Post Name
Fixed' is enabled
If the HTTP/HTTPs post method is selected:
• HTTP/HTTPS URL: Enter the URL for the HTTP/HTTPS server. The URL needs to begin with
the prex http:// or https://
• HTTP/HTTPS Port: Enter the port number the server will be listening on
• HTTP/HTTPS Meter ID: Enter a name or description for the meter to be identied on
the server
If the FTP post method is selected:
• FTP URL: Enter the URL for the FTP server. The URL needs to begin with the prex ftp://
• FTP Port: Enter the port number the server will be listening on
• FTP Username: Enter the username required to log into the FTP server
• FTP Password: Enter the password required to log into the FTP server
NOTE: The 'TEST Post Channel' button should only be utilized after clicking the 'Save' button
otherwise a fail response will be observed. If a fail response occurs after clicking 'Save' conrm the
network settings or credentials for the server.
Chapter 7: Communications
To Next Page
Loading...
Need help?
General
