www.accuenergy.com
V: 1.00 Revised: Jan 2021
58
AcuRev 2100 Series Power Meter: Web Manual
7.9 MQTT
AcuRev 2100 supports the MQTT protocol where the gateway can publish device data to a
subscriber using an MQTT broker. The MQTT broker is a central server where all MQTT clients
would connect to. The broker/server manages all message topics and updates new messages
to all clients that are subscribed to a particular topic. All related MQTT settings can be
congured in the MQTT page under the Communication tab.
7.9.1 MQTT General Settings
Under the General tab in the MQTT page, users can enable the MQTT protocol and congure
the broker settings.
• Enable MQTT: Select Enable to enable MQTT protocol
• Broker Address: Enter the broker address of the MQTT server
• Broker Port: Enter the port number for the MQTT Broker
• Client ID: Enter the Client ID for the AcuRev 2100; must be a unique ID number
• Keep Alive: The client communicates a time interval in seconds to the broker, “Keep-
Alive” is the maximum length of time in seconds that the broker and the client cannot
communicate with each other.
• Facility ID: Users can specify the facility ID
Once all settings are configured click Save. The connection to the broker can be tested by
using the Test MQTT button.
To Next Page
Loading...
Need help?
General
