AccuEnergy AcuRev 2100 - Page 80

www.accuenergy.com
V: 1.00 Revised: Jan 2021
78
AcuRev 2100 Series Power Meter: Web Manual
Chapter 11: Cong Management
The AcuRev 2100 has a configuration management page that allows users to save all web
settings with the exception of certain settings into a conguration le. This is useful if users
have more than one meter that needs to be programmed with the same settings, and
eliminates any error when trying to congure another AcuRev 2100.
The following settings are saved in the conguration le:
• All Meter settings (Wiring, CT ratio)
• Network settings (Only DNS1, DNS2, Modbus TCP Port, HTTP Proxy)
• All Email settings
• All Time/Date settings
• All Data Log settings
• All Post Channel settings
• All BACnet settings
• All SNMP settings
• Management settings (the View and Admin Access Level passwords, SSH, and Debug
Conguration)
• MQTT settings (General, User Credentials, Last Will & Testament, Topic & Parameter Selection)
The settings that are not included or aected by the Cong Management le is:
• Most Network settings (DHCP, IP, Submask, Gateway, HTTP Port for both Ethernet 1 and 2.
All WiFi settings, HTTP enable, and HTTPS port is not changed)
• AcuCloud
• Remote Access
• MQTT client ID and SSL certicates