14
Power Supply Retainer Instructions
Some of the ACTIV.A.C.
TM
Therapy Units may include a retainer strap for the power cord. This strap
helps keep the power cord in place. This strap is used only with power cords that have the square flat
connector.
1. Wrap the end tabs of the retainer strap around the charging cord
connector.
2. Press the hook-and-loop closure together to secure.
3. Plug the charging cord connector into the therapy unit.
4. Pull the retainer strap tight and press it securely onto the hook-and-
loop fastener at the base. Be sure there is no slack in the retainer strap.
5. Fold the access flap over to close the carrying case.
6. Firmly press on the access flap hook-and-loop fastener to secure the
retainer strap to the carrying case.
To Next Page
Loading...
