Notebook Manager
80 User’s Guide
❑ Brightness for LCD Panel/Contrast for LCD Panel. Click
and drag to set the LCD screen brightness and contrast
levels.
Click on the radio button of the desired item, then click on
Apply to accept. To modify the brightness and/or contrast
levels, click and hold the slider control and move to the
right to increase, move to the left to decrease the setting.
You can also click on the item, and use the cursor keys to
set the desired level.
Note: TFT active-matrix LCDs have fixed and optimized
contrast levels.
310-e.book Page 80 Tuesday, October 27, 1998 5:17 PM
To Next Page
Loading...
