Acer 310 - Display Device

Notebook Manager
Chapter 5 Software 79
❑ Enable system resume timer. Select to allow the
computer to wake-up from standby mode if the resume
timer is set and matched.
❑ System Resume Timer. When Enable system resume
timer is selected, click on the button to set the System
Resume Timer.
Display Device
Display Device is used to control various settings related to
display device(s), such as the display brightness/contrast
levels.
The items in this screen include:
❑ Boot Display Device. Sets the default display device on
boot-up.
❑ Switching Display Device. Sets the current display
device.
Note: Make sure an external monitor is connected before
External monitor is selected.
310-e.book Page 79 Tuesday, October 27, 1998 5:17 PM