Why is the color abnormal on my Acer P5271?
To address color abnormalities on your Acer Projector, first, try performing a 'Reset (All data)' from the OSD Menu. You can also try adjusting the Color Wheel Index. If the issue persists, check the Main Board, DMD Board, and Color Wheel.
How to fix Acer P5271 Projector image flicker?
To resolve image flicker on your Acer Projector, first, try performing a 'Reset (All data)' from the OSD Menu. Also, ensure that the signal cables and source are working correctly. If the issue continues, check the Lamp Driver and waveform, Lamp Module, Color Wheel, Photo Sensor (and clean it), DMD Board, and Main Board.
What to do if Acer P5271 has no light?
If your Acer Projector has no light, ensure all connectors are securely connected and aren’t broken. You may also want to check the Lamp Cover, Interrupt Switch, Lamp Module, Lamp Driver, LVPS, Main Board, Color Wheel, and Photo Sensor Board.
Why does my Acer P5271 auto shut down?
If your Acer Projector is automatically shutting down, it could be due to several reasons: * Thermal/Fan Failure: Check the LED status. The Temp LED may light or flash red, and the Power LED may light red. * Lamp Failure: Check the Lamp LED, which may light red, and the Power LED, which may light blue. * Color Wheel Failure: In this case, you should check the Color Wheel. Also, consider checking the Thermal Switch, Fan, Main Board, Lamp, Lamp Driver, Photo Sensor.
What to do if Acer P5271 Projector wireless function is abnormal?
To troubleshoot wireless function abnormalities on your Acer Projector (P5271i model only), ensure that the settings on both the projector and PC (Laptop) are correct. Also, verify that the signal strength of the wireless network connection is sufficient. If problems persist, check the Wireless Module and the Main Board.
What to do if Acer P5271 Projector universal password fails?
If the universal password is not working on your Acer Projector, please confirm whether the SNID number in Service Mode is the same as the SNID number on the back of the projector. If they are different: 1. Execute the EDID Upgrade Procedure. 2. Execute 'Un-lock SNID and Default Language Reset'. 3. Press 'Power', 'Left', 'Left', and 'Menu' buttons sequentially to enter Service Mode and obtain the SNID number, then calculate the Universal Password.
How to reset admin password on Acer P5271 Projector?
If you've forgotten the administrator password for your Acer Projector, there is a Universal Password printed on the Security Card. This password acts as a back door and will be accepted by the projector at any time, regardless of the current administrator password. To retrieve the Universal Password: 1. Click the 'AcerSNID'. 2. Input the SNID number (found on the Security Card). 3. Click 'Calculate'. The Universal Password will then appear.
How to troubleshoot Acer P5271 no image?
If your Acer Projector displays no image, verify that the signal cable and source are working correctly. If you are connecting multiple sources, use the 'Source' button to switch between them. Also, ensure all connectors are securely connected and not broken. If the problem persists, check the Main Board, DMD Board, DMD Chip, and Engine Module.
General| Native Resolution | XGA (1024 x 768) |
|---|---|
| Display Technology | DLP |
| Aspect Ratio | 4:3 (Native), 16:9 (Supported) |
| Output Ports | VGA Out, Audio Out |
| Zoom Ratio | 1.1x |
| Keystone Correction | ±40° (Vertical) |
| Connectivity | HDMI, USB |
| Projection Size | 30" to 300" |
| Throw Distance | 1.2m - 11.9m |
| Power Consumption | 240W (Eco) |
| Noise Level | 29 dBA (ECO) |
| Throw Ratio | 1.95-2.15:1 |
| Video Compatibility | NTSC, PAL, SECAM |
To Next Page
