• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 3
Using The Scan Tool
3
• Phone at 1-800-228-7667 (8:00 - 6:00 EST Monday - Friday)
Display
The display has a large viewing area displaying messages, instructions,
and diagnostic information.
✓ The back-lit liquid crystal display (LCD) is a 128 x 64 pixel display.
❒ Characters used to help operate the Scan Tool are:
`
Indicates cursor location.
? Indicates when Help is available.
] Indicates additional information is available on previous screen
by using the
UP
arrow key.
[
Indicates additional information is available on next screen by
using
the
DOWN
arrow key.
Indicates internal batteries need replaced or are not installed.
Keypad
The keypad is used to move through the different menus of the Scan
Tool. The Scan Tool’s software is designed for ease in operating and
navigating through menus.
Do not use solvents such as alcohol to clean keypad
or display. Use a mild nonabrasive detergent and a
soft cotton cloth.
Do not soak keypad as water might find its way
inside the Scan Tool.
?
OBD II Function List
=====================
I/M Readiness
Read Codes
Pending Codes
Erase Codes
State OBD Check
View Data
!
CAUTION
!
CAUTION
To Next Page
Loading...
